inner bearing
英 [ˈɪnə(r) ˈbeərɪŋ]
美 [ˈɪnər ˈberɪŋ]
n. 内轴承
双语例句
- The contribution of additional inner forces of bearing walls and frames are studied.
对承重墙和框架在差异沉降下的附加内力分布进行了研究。 - The kind of material may be made into bearing, slides, thrust washers, inner race of spherical plain bearing, and so on.
这种材料可制成轴承、滑道、止推垫圈、关节轴承内圈等。 - If an oil slinger is used behind the inner pinion bearing cone, deduct the thickness of the slinger from the dial indicator reading and use that total for shim selection.
如果抛油环用在内侧驱动小齿轮内圈的后面，从针盘指示表读数中扣除抛油环的厚度，垫片的选择用这个总数。 - Race& rim grinding machine for inner ring of roller bearing
外圈有止推挡边轴承滚柱轴承内圈滚道挡边磨床 - Research on effect of inner surface reinforcing on structure bearing capacity by model test in defective tunnel
内表面补强对缺陷病害隧道结构承载力影响的模型试验研究 - Contact Seal and Selection of Slot Type for Inner Ring of Ball Bearing
球轴承内圈接触密封及槽形选择 - Defects analysis of the inner ring faces of locomotive bearing
铁路轴承内圈端面缺陷分析 - The settlement of the inner bearing s of the new constructed bridge will influence the behavior of the longitudinal connections. The effects of the settlement on the inner bearing – section are more important than that on the other sections.
新桥内支座沉降对接缝受力影响最大，且对于内支座截面的影响要远大于其他截面位置。 - Analysis on Cause of Crack for Inner Race of 6206 Bearing
6206内圈开裂原因分析 - Two-row inner restrictor hydrostatic bearing without oil back curve
无回油槽双列内节流液体静压轴承的研究 - The equation for calculating Bladder dimension is derived based on the relationship between bladder pressure and the inner diameter of composite bearing cylinder.
根据气囊充压压力与复合材料承力筒内径之间的变化关系，给出了成型复合材料承力筒内表面的气囊尺寸计算方程。 - Study on Inner Friction and Vertical Bearing Capacity Simulation of Single Thin-wall Cast-in-situ Tubular Pile
大直径现浇薄壁筒桩单桩内摩阻力研究及竖向承载力模拟 - Influence of casing inner wall bearing on resisting inner pressure performance
套管内壁磨损对其抗内压性能的影响 - According to the shape and features of fracture face of rivet and inner and outer rings of bearing after failure, the mechanism resulting in bearing failure was analyzed.
根据铆钉断口及轴承内外套失效后的形貌，分析轴承失效产生机理。 - Structure Analysis and Optimum for Hoist Drum with Inner Ribs Bearing Complex External Force
复杂受力带筋卷筒结构分析与最优设计 - Then, the effect of model parameters on displacement of soil and inner stress and displacement of bearing pile were discussed and rule of pit deformation was studied too.
讨论模型参数对土体变形及支护桩变形与内力的影响和基坑变形规律的研究； - Relative ship Analysis on the Contact Part Between Rolling Element and the Inner Ring of Ball Bearing
滚动轴承的滚动体与内圈接触部分的相对滑动分析 - The bear, structure of driving system for torquer and dynamic balance and installation technique were studied. The design and test of double inner integral ball bearing and storage ring of lubricant oil were presented.
研究了轴承、力矩器和驱动系统动平衡结构，以及装调工艺，同时介绍了双轴连轴承+储油环系统的设计和试验情况。 - The radial and tangential stress maximums are both in the inner surface of bearing alloy.
径向应力与周向应力的最大值位于轴瓦合金层内表面。 - Heat Transfer Calculation of Drawer Style Oil-cooler of Inner Circulated Thrust Bearing
内循环推力轴承抽屉式油冷却器传热计算 - The results showed that the defects on the inner ring of the bearing are hair-cracking causing by serious impurities or slag enclosures, these are metallurgy defects.
结果表明，轴承内圈端面上的缺陷由夹杂物或夹渣所致，为冶金缺陷。 - Which the outer spindle is a hollow structure, and the inner spindle is located in the outer spindle; the outer bearing is located in the box, and the inner bearing is located in the outer spindle.
该系统为外主轴采用空心结构，内主轴位于外主轴内；外轴承紧固于壳体内，内轴承嵌于外主轴内壁。 - On this basis, the force of the outer ring, the inner ring and the bearing of the gimbal system are analyze.
在此基础上，分析万向架系统外环、内环以及轴承的受力情况。 - According to the differences of the inner bearing structure in function mechanisms, the coupling process of the inner and the outer bearing structure is divided into two stages, the support principles and methods of each stage are proposed. 6.
根据内承载结构作用机制的差异，将内、外承载结构耦合过程分为两个阶段，提出了每个阶段的支护原则和支护方法。 - The causes of the micro-vibration were analyzed from two aspects: the inner fluid in the aerostatic bearing and the outer perturbation of the carriage.
从溜板轴承内部流体和溜板外部摄动两个方面对微振动的成因进行了分析。 - There exist these problems mainly because of the vague definition to social responsibility connotation and lack of inner drive in bearing social responsibility.
存在这些问题，主要是由于社会责任内涵界定不清和缺乏承担社会责任的内生动力所致。 - A stabilization condition of the outer bearing structure and surrounding rock is put forward, based on which the mechanism that the inner bearing structure makes the outer bearing structure stability is discussed.
提出了外承载结构稳定的条件和巷道围岩稳定的条件，探讨了内承载结构促使外承载结构稳定的机理。 - An elastic-plastic theoretical model of circular roadways considering the interaction between the inner and the outer bearing structure is presented, based on which the expressions of stress, displacement and the radiuses of the plastic zone and the loose zone in the surrounding rock are derived.
建立了圆形巷道内、外承载结构相互作用弹塑性理论模型，得到了围岩塑性区和破碎区半径、围岩应力及围岩位移的表达式。 - The temporal effects, the bearing capability, and the support effect of the inner bearing structures formed through bolt support, grouting, and brace support are analyzed. The influences of the cable on the inner and the outer bearing structures are analyzed.
分析了锚杆支护、注浆加固、支架支护等形式内承载结构的时间效应、承载能力和支撑作用效果；分析了锚索支护对内、外承载结构的作用。